Toyota RAV4 (RHD) - MMC Owner'S Manual Download Page 363 | Manualshive

Page: 363 / 646

background image

362

4-5. Using the driving support systems

*

: After stopping the vehicle, do not stop the engine until the display message has

turned off.

Message

Details/Actions

“4WD System Over-

heated Switching to 2WD

Mode”

4WD system is overheating.



Perform the following actions.

• Reduce the vehicle speed until the message disap-

pears.

• Stop the vehicle in a safe place and let the engine

idle.

*

Once the display message on the multi-information dis-
play turns off, there is no problem continuing to drive.

If the message does not disappear, have your vehicle
checked by your Toyota dealer immediately.

“4WD System Over-

heated 2WD Mode

Engaged”

The vehicle switched from four-wheel drive (4WD) to
front wheel drive due to overheating.



Perform the following actions.

• Reduce the vehicle speed until the message disap-

pears.

• Stop the vehicle in a safe place and let the engine

idle.

*

Once the display message on the multi-information dis-
play turns off, the 4WD system returns to normal.

If the message does not disappear, have your vehicle
checked by your Toyota dealer immediately.

“4WD System Malfunction

2WD Mode Engaged Visit

Your Dealer”

A malfunction occurred in the 4WD system.



Have your vehicle checked by your Toyota dealer
immediately.

WARNING

■

The ABS does not operate effec-
tively when

●

The limits of tire gripping perfor-
mance have been exceeded (such
as excessively worn tires on a snow
covered road).

●

The vehicle hydroplanes while driv-
ing at high speed on wet or slick
roads.

■

Stopping distance when the ABS
is operating may exceed that of
normal conditions

The ABS is not designed to shorten
the vehicle’s stopping distance.
Always maintain a safe distance from
the vehicle in front of you, especially
in the following situations:

●

When driving on dirt, gravel or
snow-covered roads

●

When driving with tire chains

«
...
361
362
363
364
365
...
»

Summary of Contents for RAV4 (RHD) - MMC







































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for RAV4 (RHD) - MMC

Brand: Jeda Pages: 8

Brand: Jeep Pages: 496

FRONT HEADLIGHT LENS COVER

Brand: Bimmer Jakes Pages: 4

Brand: Alpine Pages: 69

Brand: Allen Sports Pages: 2

Brand: Cargo Floor Pages: 16

Brand: Ford Pages: 22

Brand: Renault Pages: 238

Brand: Whispbar Pages: 15

Brand: ULTIMATE SPEED Pages: 10

Brand: GROM Audio Pages: 20

Brand: EUFAB Pages: 12

Brand: Beeper Pages: 2

Brand: Yakima Pages: 10

Brand: Haltech Pages: 12

Brand: Or-Fab Pages: 5

Brand: AL-KO Pages: 88

Brand: Federal Signal Corporation Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands