Toyota RAV4 (RHD) - MMC Owner'S Manual Download Page 249

Page: 249 / 646

248

4-3. Operating the lights and wipers

Turns the front fog lights

Turns both front and rear

fog lights on

Releasing the switch ring returns it to

Operating the switch ring again turns
only the rear fog light off.

■

Fog lights can be used when



Vehicles with front fog light switch

The headlights or the front position lights
are turned on.



Vehicles with rear fog light switch

The headlights are turned on.



Vehicles with front and rear fog light
switch

Front fog lights: The headlights or the
front position lights are turned on.

Rear fog light: The front fog lights are
turned on.

Operating the

lever operates

the wipers or washer as follows:



Intermittent windshield wipers

Off

Intermittent operation

Low speed operation

High speed operation

Temporary operation

Windshield wipers and
washer

Operating the lever can switch
between automatic operation
and manual operation, or can
use the washer.

NOTICE

■

When the windshield is dry

Do not use the wipers, as they may
damage the windshield.

Operating the wiper lever

Summary of Contents for RAV4 (RHD) - MMC







































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RAV4 (RHD) - MMC

Reviews:

Related manuals for RAV4 (RHD) - MMC

Brands by name

Popular brands

Toyota RAV4 (RHD) - MMC, Owner'S Manual

Search results

Summary of Contents for RAV4 (RHD) - MMC

Reviews:

Related manuals for RAV4 (RHD) - MMC

Brands by name

Popular brands