Toyota RAV4 (RHD) - MMC Owner'S Manual Download Page 80 | Manualshive

Page: 80 / 646

background image

79

1

1-2. Child safety

For s

a

fety

and s

e

c

u

rity

child restraint system
(Part No. 73119-22010)

■

ISOFIX lower anchorages
(ISOFIX child restraint system)

Lower anchorages are provided for
the outboard rear seats. (Tags dis-
playing the location of the anchor-
ages are attached to the seats.)

■

Installation with ISOFIX lower
anchorage (ISOFIX child
restraint system)

Install the child restraint system in
accordance to the operation man-
ual enclosed with the child restraint
system.
If the child restraint system on hand
is not within the “universal” cate-
gory (or the necessary information
is not in the table), refer to the
“Vehicle List” provided by the child
restraint system maker for various
possible installation positions, or
check the compatibility after asking
the retailer of the child seat.
(



P.58, 63, 68, 73)

1

Adjust the seatback angle to the
most upright position. When
installing a forward-facing child

WARNING

■

When installing a child restraint
system

Observe the following precautions.
Failure to do so may result in death or
serious injury.

●

Do not allow children to play with
the seat belt. If the seat belt
becomes twisted around a child’s
neck, it may lead to choking or
other serious injuries that could
result in death. If this occurs and
the buckle cannot be unfastened,
scissors should be used to cut the
belt.

●

Ensure that the belt and plate are
securely locked and the seat belt is
not twisted.

●

Shake the child restraint system left
and right, and forward and back-
ward to ensure that it has been
securely installed.

●

After securing a child restraint sys-
tem, never adjust the seat.

●

When a junior seat (booster seat) is
installed, always ensure that the
shoulder belt is positioned across
the center of the child’s shoulder.
The belt should be kept away from
the child’s neck, but not so that it
could fall off the child’s shoulder.

●

Follow all installation instructions
provided by the child restraint sys-
tem manufacturer.

Child restraint system fixed
with an ISOFIX lower
anchorage

«
...
78
79
80
81
82
...
»

Summary of Contents for RAV4 (RHD) - MMC







































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for RAV4 (RHD) - MMC

Brand: Davis Instruments Pages: 16

Cherokee 16 1982

Brand: Jeep Pages: 1311

Brand: Metra Electronics Pages: 8

Brand: BURY Pages: 2

Brand: CrimeStopper Pages: 1

Brand: Skoda Pages: 324

Brand: Lincoln Pages: 538

Brand: Flash Cover Pages: 2

Brand: Yakima Pages: 10

Brand: Mazda Pages: 196

Brand: Skoda Pages: 288

Directechs FORD11

Brand: Directed Pages: 23

Brand: Havis Pages: 4

Brand: SSANGYONG Pages: 1063

Brand: Broadfeet Pages: 4

Brand: Fastway Pages: 2

Brand: Volvo Pages: 1

Brand: Volvo Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands