Toyota RAV4 (RHD) - MMC Owner'S Manual Download Page 538

Page: 538 / 646

537

7-3. Do-it-yourself maintenance

Mai

tenanc

e and c

Only type A fuse can be removed using
the pullout tool.

Check if the fuse is blown.

Replace the blown fuse with a new fuse
of an appropriate amperage rating. The
amperage rating can be found on the
fuse box lid.



Type A

Normal fuse

Blown fuse



Type B

Normal fuse

Blown fuse



Type C

Normal fuse

Blown fuse

■

After a fuse is replaced

●

When installing the lid, make sure that
the tab is installed securely.

●

If the lights do not turn on even after
the fuse has been replaced, a bulb
may need replacement. (



P.538)

●

If the replaced fuse blows again, have
the vehicle inspected by your Toyota
dealer.

■

If there is an overload in a circuit

The fuses are designed to blow, protect-
ing the wiring harness from damage.

WARNING

■

To prevent system breakdowns
and vehicle fire

Observe the following precautions.
Failure to do so may cause damage
to the vehicle, and possibly a fire or
injury.

●

Never use a fuse of a higher
amperage rating than that indi-
cated, or use any other object in
place of a fuse.

Summary of Contents for RAV4 (RHD) - MMC







































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RAV4 (RHD) - MMC

Reviews:

Related manuals for RAV4 (RHD) - MMC

Brands by name

Popular brands

Toyota RAV4 (RHD) - MMC, Owner'S Manual

Search results

Summary of Contents for RAV4 (RHD) - MMC

Reviews:

Related manuals for RAV4 (RHD) - MMC

Brands by name

Popular brands