Toyota RAV4 (RHD) - MMC Owner'S Manual Download Page 257 | Manualshive

Page: 257 / 646

background image

256

4-5. Using the driving support systems

WARNING

■

To avoid malfunction of the radar
sensor

Observe the following precautions.
Otherwise, the radar sensor may not
operate properly, possibly leading to
an accident resulting in death or seri-
ous injury.

●

Keep the radar sensor and the
radar sensor cover clean at all
times.

Radar sensor

Radar sensor cover

If the front of the radar sensor or the
front or back of the radar sensor
cover is dirty or covered with water
droplets, snow, etc., clean it.

Clean the radar sensor and radar
sensor cover with a soft cloth to avoid
damaging them.

●

Do not attach accessories, stickers
(including transparent stickers) or
other items to the radar sensor,
radar sensor cover or surrounding
area.

●

Do not subject the radar sensor or
its surrounding area to a strong
impact.
If the radar sensor, front grille, or
front bumper has been subjected to
a strong impact, have the vehicle
inspected by your Toyota dealer.

●

Do not disassemble the radar sen-
sor.

A

B

●

Do not modify or paint the radar
sensor or radar sensor cover.

●

In the following cases, the radar
sensor must be recalibrated. Con-
tact your Toyota dealer for details.

• When the radar sensor or front

grille are removed and installed, or
replaced

• When the front bumper is replaced

■

To avoid malfunction of the front
camera

Observe the following precautions.
Otherwise, the front camera may not
operate properly, possibly leading to
an accident resulting in death or seri-
ous injury.

●

Keep the windshield clean at all
times.

• If the windshield is dirty or covered

with an oily film, water droplets,
snow, etc., clean the windshield.

• If a glass coating agent is applied to

the windshield, it will still be neces-
sary to use the windshield wipers to
remove water droplets, etc. from
the area of the windshield in front of
the front camera.

• If the inner side of the windshield

where the front camera is installed
is dirty, contact your Toyota dealer.

«
...
255
256
257
258
259
...
»

Summary of Contents for RAV4 (RHD) - MMC







































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for RAV4 (RHD) - MMC

Brand: Jeep Pages: 42

Brand: Jeep Pages: 44

Brand: Cadillac Pages: 20

Brand: Jeep Pages: 7

Brand: Cadillac Pages: 20

Brand: Cadillac Pages: 354

Brand: Cadillac Pages: 20

Brand: Cadillac Pages: 20

Brand: Cadillac Pages: 10

2013 Escalade ESV

Brand: Cadillac Pages: 524

Brand: Cadillac Pages: 20

Brand: Cadillac Pages: 438

Brand: Cadillac Pages: 450

2011 Escalade Hybrid

Brand: Cadillac Pages: 94

2011 Escalade Hybrid

Brand: Cadillac Pages: 94

Brand: Cadillac Pages: 78

Brand: Cadillac Pages: 8

Brand: Cadillac Pages: 113

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands