manualshive.com logo in svg

Toyota RAV4 (RHD) - MMC, Owner'S Manual

The Toyota RAV4 (RHD) - MMC user manual is available for free download on manualshive.com. This comprehensive manual provides detailed information about the dimensions of the vehicle, ensuring a seamless ownership experience. Access the manual now and optimize your RAV4 driving experience with ease.

Share
Download
background image

276

4-5. Using the driving support systems

lines or a course

*2

. (When a white 

[yellow] line or course

*2

 is recognized 

on only one side, the system will oper-
ate only for the recognized side.)

• Width of traffic lane is approximately 3 

m (9.8 ft.) or more.

• Turn signal lever is not operated. 

(Vehicles with Blind Spot Monitor: 
Except when another vehicle is in the 
lane on the side where the turn signal 
was operated)

• Vehicle is not being driven around a 

sharp curve.

• No system malfunctions are detected. 

(

P.278)

*1

: The function operates even if the 

vehicle speed is less than approxi-
mately 50 km/h (32 mph) when the 
lane centering function is operating.

*2

: Boundary between asphalt and the 

side of the road, such as grass, soil, 
or a curb

●

Steering assist function

This function operates when all of the 
following conditions are met in addition 
to the operation conditions for the lane 
departure alert function.

• Setting for “Steering Assist” in the 

 

screen of the multi-information display 
is set to “ON”. (

P.109)

• Vehicle is not accelerated or deceler-

ated by a fixed amount or more.

• Steering wheel is not operated with a 

steering force level suitable for chang-
ing lanes.

• ABS, VSC, TRC and PCS are not 

operating.

• TRC or VSC is not turned off.
• Hands off steering wheel warning is 

not displayed. (

P.277)

●

Vehicle sway warning function

This function operates when all of the 
following conditions are met.

• Setting for “Sway Warning” in the 

 

screen of the multi-information display 
is set to “ON”. (

P.109)

• Vehicle speed is approximately 50 

km/h (32 mph) or more.

• Width of traffic lane is approximately 3 

m (9.8 ft.) or more.

• No system malfunctions are detected. 

(

P.278)

●

Lane centering function

This function operates when all of the 
following conditions are met.
• LTA is turned on.
• Setting for “Steering Assist” and “Lane 

Center” in the 

 screen of the multi-

information display are set to “ON”. 
(

P.109)

• This function recognizes white (yel-

low) lane lines or the position of a pre-
ceding vehicle (except when the 
preceding vehicle is small, such as a 
motorcycle).

• The dynamic radar cruise control with 

full-speed range is operating in vehi-
cle-to-vehicle distance control mode.

• Width of traffic lane is approximately 3 

to 4 m (10 to 13 ft.).

• Turn signal lever is not operated.
• Vehicle is not being driven around a 

sharp curve.

• No system malfunctions are detected. 

(

P.278)

• Vehicle does not accelerate or decel-

erate by a fixed amount or more.

• Steering wheel is not operated with a 

steering force level suitable for chang-
ing lanes.

• ABS, VSC, TRC and PCS are not 

operating.

• TRC or VSC is not turned off.
• Hands off steering wheel warning is 

not displayed. (

P.277)

• The vehicle is being driven in the cen-

ter of a lane.

• Steering assist function is not operat-

ing.

■

Temporary cancelation of functions

●

When operation conditions are no lon-
ger met, a function may be temporar-
ily canceled. However, when the 
operation conditions are met again, 
operation of the function is automati-
cally restored. (

P.275)

Summary of Contents for RAV4 (RHD) - MMC







































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for RAV4 (RHD) - MMC

AA Products KX405 Instruction Manual preview
KX405
Brand: AA Products Pages: 8
Daihatsu G200 Service Manual preview
G200
Brand: Daihatsu Pages: 485
AccuAir AA-4397 Installation Manual preview
AA-4397
Brand: AccuAir Pages: 40
Peak PKC0RG Owner'S Manual preview
PKC0RG
Brand: Peak Pages: 10
Metra Electronics 70-5511 Installation Instructions preview
70-5511
Brand: Metra Electronics Pages: 2
Quadratec Brute Strength 12057.0271 Installation Manual preview
Brute Strength 12057.0271
Brand: Quadratec Pages: 6
Ford FIESTA ST 2019 Supplement Manual preview
FIESTA ST 2019
Brand: Ford Pages: 37
Honda 08A06-361-210 Installation Instructions preview
08A06-361-210
Brand: Honda Pages: 4
Pro-gard SAFESTOP SS0005 Installation Manual preview
SAFESTOP SS0005
Brand: Pro-gard Pages: 4
Thule 1430 Kit Instructions Manual preview
1430 Kit
Brand: Thule Pages: 8
mtf TRANSPORT SYSTEM BackPower Manual preview
BackPower
Brand: mtf TRANSPORT SYSTEM Pages: 9
Over Armour Offroad TX-STAMP-4-FC04 Instructions For Installation And Care preview
TX-STAMP-4-FC04
Brand: Over Armour Offroad Pages: 9
Carcomm CHFS-34 HTC Installation Manual preview
CHFS-34 HTC
Brand: Carcomm Pages: 2
Safe Fleet PRIME DESIGN HRR3-E-PM42 Manual preview
PRIME DESIGN HRR3-E-PM42
Brand: Safe Fleet Pages: 12
N.R. AUTOSEATS Top User Manual preview
Top
Brand: N.R. AUTOSEATS Pages: 8
Toyota Avalon 2001 Operating Manual preview
Avalon 2001
Brand: Toyota Pages: 295
Ford 1999 Crown Victoria Owner'S Manual preview
1999 Crown Victoria
Brand: Ford Pages: 208
Buick 1997 Skylark Owner'S Manual preview
1997 Skylark
Brand: Buick Pages: 371

Brands by name

Popular brands

Load more brands