Toyota RAV4 (RHD) - MMC Owner'S Manual Download Page 151

Page: 151 / 646

150

3-2. Opening, closing and locking the doors

3-2.Opening, closing and locking the doors

■

Using the entry function (vehi-
cles with smart entry & start
system equipped with entry
function)

Carry the electronic key to enable
this function.

Grip the front door handle to
unlock the doors.

Make sure to touch the sensor on the
back of the handle.
The doors cannot be unlocked for 3
seconds after the doors are locked.

Touch the lock sensor (the
indentation on the upper part of
the door handle) to lock the
doors.

Check that the door is securely locked.

■

Using the wireless remote
control



Vehicles without smart entry &
start system

Locks all the doors

Check that the door is securely locked.

Press and hold to close the side win-

dows.

Unlocks all the doors

Press and hold to open the side win-

dows.

: These settings must be customized

at your Toyota dealer.



Vehicles with smart entry & start
system

Locks all the doors

Check that the door is securely locked.

Press and hold to close the side win-
dows and moon roof (if equipped) or

panoramic moon roof (if equipped).

Side doors

The vehicle can be locked and
unlocked using the entry func-
tion, wireless remote control,
key or door lock switch.

Unlocking and locking the
doors from the outside

Summary of Contents for RAV4 (RHD) - MMC







































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RAV4 (RHD) - MMC

Reviews:

Related manuals for RAV4 (RHD) - MMC

Brands by name

Popular brands

Toyota RAV4 (RHD) - MMC, Owner'S Manual

Search results

Summary of Contents for RAV4 (RHD) - MMC

Reviews:

Related manuals for RAV4 (RHD) - MMC

Brands by name

Popular brands