Toyota RAV4 (RHD) - MMC Owner'S Manual Download Page 202

Page: 202 / 646

201

4-1. Before driving

riv

ing

4-1.Before driving

■

Starting the engine



P.218, 219

■

Driving



Automatic transmission or CVT

With the brake pedal depressed,
shift the shift lever to D.
(



P.223, 228)

Release the parking brake.
(



P.236)

If the parking brake is in automatic
mode, the parking brake is released
automatically when shifting the shift
lever to any position other than P.
(



P.236)

Gradually release the brake
pedal and gently depress the
accelerator pedal to accelerate
the vehicle.



Manual transmission

While depressing the clutch
pedal, shift the shift lever to 1.
(



P.232)

Release the parking brake.
(



P.236)

Gradually release the clutch
pedal. At the same time,
depress the accelerator pedal to
accelerate the vehicle.

■

Stopping



Automatic transmission or CVT

With the shift lever in D, depress
the brake pedal.

If necessary, set the parking
brake. (



P.236)

If the vehicle is to be stopped for an
extended period of time, shift the shift
lever to P. (



P.223, 228)



Manual transmission

While depressing the clutch
pedal, depress the brake pedal.

If necessary, set the parking
brake. (



P.236)

If the vehicle is to be stopped for an
extended period of time, shift the shift
lever to N. (



P.232)

■

Parking the vehicle



Automatic transmission or CVT

With the shift lever in D, depress
the brake pedal.

Set the parking brake (



P.236),

and shift the shift lever to P
(



P.223, 228).

Turn the engine switch to OFF
to stop the engine.

Lock the door, making sure that
you have the key on your per-
son.

If parking on a hill, block the wheels as
needed.



Manual transmission

While depressing the clutch
pedal, depress the brake pedal.

Shift the shift lever to N.
(



P.232)

Driving the vehicle

The following procedures
should be observed to ensure
safe driving:

Driving procedure

Summary of Contents for RAV4 (RHD) - MMC







































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RAV4 (RHD) - MMC

Reviews:

Related manuals for RAV4 (RHD) - MMC

Brands by name

Popular brands

Toyota RAV4 (RHD) - MMC, Owner'S Manual

Search results

Summary of Contents for RAV4 (RHD) - MMC

Reviews:

Related manuals for RAV4 (RHD) - MMC

Brands by name

Popular brands