Toyota RAV4 (RHD) - MMC Owner'S Manual Download Page 183

Page: 183 / 646

182

3-3. Adjusting the seats

■

Front seats

Pull the head restraints up.

Down

Push the head restraint down while

pressing the lock release button

■

Rear seats

Pull the head restraints up.

Down

Push the head restraint down while

pressing the lock release button

■

Adjusting the height of the head
restraints (front seats)

Make sure that the head restraints are
adjusted so that the center of the head
restraint is closest to the top of your
ears.

■

Adjusting the rear seat head
restraint

Always raise the head restraint one level
from the stowed position when using.

Pull the head restraint up while
pressing the lock release button

Head restraints

Head restraints are provided
for all seats.

WARNING

■

Head restraint precautions

Observe the following precautions
regarding the head restraints.
Failure to do so may result in death or
serious injury.

●

Use the head restraints designed
for each respective seat.

●

Adjust the head restraints to the
correct position at all times.

●

After adjusting the head restraints,
push down on them and make sure
they are locked in position.

●

Do not drive with the head
restraints removed.

Vertical adjustment

Removing the head
restraints

Summary of Contents for RAV4 (RHD) - MMC







































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RAV4 (RHD) - MMC

Reviews:

Related manuals for RAV4 (RHD) - MMC

Brands by name

Popular brands

Toyota RAV4 (RHD) - MMC, Owner'S Manual

Search results

Summary of Contents for RAV4 (RHD) - MMC

Reviews:

Related manuals for RAV4 (RHD) - MMC

Brands by name

Popular brands