Toyota RAV4 (RHD) - MMC Owner'S Manual Download Page 244

Page: 244 / 646

243

4-3. Operating the lights and wipers

riv

ing

the lights will turn off automatically 20
minutes after the battery-saving function
has been reactivated:

●

When the headlight switch is operated

●

When a door is opened or closed

■

If “Headlight System Malfunction
Visit Your Dealer” is displayed on
the multi-information display

The system may be malfunctioning.
Have the vehicle inspected by your
Toyota dealer.

■

Customization

Settings (e.g. light sensor sensitivity)
can be changed.
(Customizable features:



P.617)

With the headlights on, push the
lever away from you to turn on
the high beams.

Pull the lever toward you to the center
position to turn the high beams off.

Pull the lever toward you and
release it to flash the high
beams once.

You can flash the high beams with the
headlights on or off.

This system allows the headlights
to be turned on for 30 seconds
when the engine switch is turned to
OFF.

Pull the lever toward you and
release it with the light switch is in

after turning the engine

switch to OFF.

Pull the lever toward you and release it
again to turn off the lights.

NOTICE

■

To prevent battery discharge

Do not leave the lights on longer than
necessary when the engine is not run-
ning.

Turning on the high beam
headlights

Follow me home system (if
equipped)

Summary of Contents for RAV4 (RHD) - MMC







































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RAV4 (RHD) - MMC

Reviews:

Related manuals for RAV4 (RHD) - MMC

Brands by name

Popular brands

Toyota RAV4 (RHD) - MMC, Owner'S Manual

Search results

Summary of Contents for RAV4 (RHD) - MMC

Reviews:

Related manuals for RAV4 (RHD) - MMC

Brands by name

Popular brands