Toyota RAV4 (RHD) - MMC Owner'S Manual Download Page 114

Page: 114 / 646

113

2-1. Instrument cluster

Vehi

le s
tatus

informati

on and indi

tors

■

Driving support system infor-
mation display

Select to display the operational
status of the following systems:



LTA (Lane Tracing Assist)

(



P.269)



LDA (Lane Departure Alert with

steering control)

(



P.278)



Dynamic radar cruise control

with full-speed range

(



P.286)



Dynamic radar cruise control

(



P.297)



Cruise control

(



P.306)

: If equipped

■

Navigation system-linked dis-
play (if equipped)

Select to display the following navi-
gation system-linked information.



Route guidance



Compass display (north-up dis-
play/heading-up display)

Select to enable selection of an
audio source or track on the dis-
play.

■

Drive information

2 items that are selected using the

“Drive Info Items” setting (average
speed, distance and total time) can
be displayed vertically.

The displayed information changes
according to the “Drive Info Type”
setting (since the system was
started or between resets).
(



P.114)

Use the displayed information as a ref-
erence only.

Following items will be displayed.



“Trip”

• “Average Speed”: Displays the aver-

age vehicle speed since engine start

• “Distance”: Displays the distance

driven since engine start

• “Total Time”: Displays the elapsed

time since engine start

: These items are reset each time the

engine stops.



“Total”

• “Average Speed”: Displays the aver-

age vehicle speed since the display

was reset

• “Distance”: Displays the distance

driven since the display was reset

• “Total Time”: Displays the elapsed

time since the display was reset

: To reset, display the desired item and

press and hold

Driving support system
information display

Audio system-linked dis-
play (if equipped)

Vehicle information display

Summary of Contents for RAV4 (RHD) - MMC







































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RAV4 (RHD) - MMC

Reviews:

Related manuals for RAV4 (RHD) - MMC

Brands by name

Popular brands

Toyota RAV4 (RHD) - MMC, Owner'S Manual

Search results

Summary of Contents for RAV4 (RHD) - MMC

Reviews:

Related manuals for RAV4 (RHD) - MMC

Brands by name

Popular brands