Toyota RAV4 (RHD) - MMC, Owner'S Manual

Page: 463 / 646

462 6-4. Using the other interior features
The USB charging ports are used
to supply 2.1 A of electricity at 5 V
to external devices.
The USB charging ports are for
charging only. They are not
designed for data transfer or other
purposes.
Depending on the external device,
it may not charge properly. Refer to
the manual included with the device
before using a USB charging port.
■
Using the USB charging ports
 Console box
Open the console box and open the
lid.

Rear
Open the lid.
■ The USB charging ports can be
used when
The engine switch is in ACC or ON.
■ Situations in which the USB
charging ports may not operate
correctly
● If a device which consumes more than
2.1 A at 5 V is connected
● If a device designed to communicate
with a personal computer, such as a
USB memory device, is connected
● If the connected external device is
turned off (depending on device)
● If the temperature inside the vehicle is
high, such as after the vehicle has
been parked in the sun
■ About connected external devices
Depending on the connected external
device, charging may occasionally be
suspended and then start again. This is
not a malfunction.
USB charging ports (if
equipped)
NOTICE
■
To prevent damage to the USB
charging ports
● Do not insert foreign objects into
the ports.
●
Do not spill water or other liquids
into the ports.
● When the USB charging ports are
not in use, close the lids. If a foreign
object or liquid enters a port may
cause a short circuit.
● Do not apply excessive force to or
impact the USB charging ports.
● Do not disassemble or modify the
USB charging ports.
■ To prevent damage to external
devices
● Do not leave external devices in the
vehicle. The temperature inside the
vehicle may become high, resulting
in damage to an external device.