Toyota RAV4 (RHD) - MMC Owner'S Manual Download Page 112

Page: 112 / 646

111

2-1. Instrument cluster

Vehi

le s
tatus

informati

on and indi

tors

Select to display fuel consumption
data in various forms.

■

Speedometer display/Dis-
tance to empty (4.2-inch dis-
play)

Speedometer display

Displays the vehicle speed.

Distance to empty

Displays the driving range with remain-
ing fuel. (



P.112)

■

Fuel Economy

Following information is displayed.

Distance to empty

Displays the driving range with remain-
ing fuel. (



P.112)

Current fuel economy

Displays the instantaneous current fuel
Economy.

Average fuel economy

Displays the average fuel economy
since the function was reset or the
average fuel economy after starting or

refueling.

*1, 2, 3

The average fuel economy selected by

“Fuel Economy” on the

screen is

displayed. (



P.114)

: Use the displayed fuel consumption

as a reference only.

: Average fuel economy since the

function was reset can be reset by

pressing and holding

: Average fuel economy after starting

is reset each time the engine stops.

Icon

Display

Driving information display
(



P.111)

Driving support system
information display
(



P.113)

Audio system-linked dis-
play (if equipped) (



P.113)

Vehicle information display
(



P.113)

Settings display (



P.114)

Warning message display
(



P.117)

Driving information display

Summary of Contents for RAV4 (RHD) - MMC







































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RAV4 (RHD) - MMC

Reviews:

Related manuals for RAV4 (RHD) - MMC

Brands by name

Popular brands

Toyota RAV4 (RHD) - MMC, Owner'S Manual

Search results

Summary of Contents for RAV4 (RHD) - MMC

Reviews:

Related manuals for RAV4 (RHD) - MMC

Brands by name

Popular brands