Toyota Land Cruiser 2005 Owner'S Manual Download Page 82

Page: 82 / 351

Hitting a curb, edge of

pavement or hard sur-

face

Falling into or jump-

ing over a deep hole

Landing hard or vehicle falling

The SRS side airbags and curtain shield

airbags may deploy if a severe impact
occurs to the underside of your vehicle.

Some examples are shown in the il-

lustration.

13c538b

The SRS side airbag and curtain shield

airbag system consists mainly of the fol-
lowing components, and their locations are

shown in the illustration.

1. SRS warning light
2. Curtain shield airbag modules

(airbag and inflator)

3. Side airbag modules

(airbag and inflator)

4. Curtain  shield  airbag  sensors
5. Side  and  curtain  shield  airbag  sensors
6. Airbag  sensor  assembly

The SRS side airbag and curtain shield

airbag system is controlled by the airbag

sensor assembly. The airbag sensor as-
sembly consists of a safing sensor and

airbag  sensor.
In  a  severe  side  impact,  the  side  and
curtain  shield  airbag  sensor  and/or  the

curtain shield airbag sensor trigger(s) the

side airbag inflators and/or the curtain
shield airbag inflators. At this time, a

chemical reaction in the inflators quickly

fills the airbags with non

−

toxic gas to help

restrain the lateral motion of the occu-

pants.
In a vehicle rollover, the airbag sensor

assembly triggers the curtain shield airbag

inflator. At this time, a chemical reaction
in the inflators quickly fills the airbags

with non

−

toxic gas to help restrain the

lateral motion of front and second seat
occupants.

Summary of Contents for Land Cruiser 2005
































































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2005

Reviews:

Related manuals for Land Cruiser 2005

Brands by name

Popular brands

Toyota Land Cruiser 2005, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2005

Reviews:

Related manuals for Land Cruiser 2005

Brands by name

Popular brands