Toyota Land Cruiser 2005 Owner'S Manual Download Page 66

Page: 66 / 351

To release the belt, press the buckle

release button.

—Seat belt extender

If your seat belts cannot be fastened se-

curely because they are not long enough,

a personalized seat belt extender is avail-
able from your Toyota dealer free of

charge.
Please contact your local Toyota dealer so
that the dealer can order the proper re-

quired length for the extender. Bring the

heaviest coat you expect to wear for prop-
er measurement and selection of length.

Additional ordering information is available

at your Toyota dealer.

CAUTION

When using the seat belt extender,
observe the following precautions.

Failure to follow these instructions

could reduce the effectiveness of the
seat belt restraint system in case of

an accident, increasing the chance of

personal injury.

Remember that the extender pro-

vided for you may not be safe when

used on a different vehicle, for
another person, or at a different

seating position than the one origi-

nally intended.

If the seat belt extender has been
connected to the driver’s seat belt

buckle without the driver actually

wearing the seat belt, the SRS driv-
er’s airbag system will judge that

the driver is wearing it. In this

case, the driver’s airbag may not
activate correctly, causing death or

serious injury in the event of colli-

sion. Be sure to wear the seat belt
with the seat belt extender.

Summary of Contents for Land Cruiser 2005
































































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2005

Reviews:

Brands by name

Popular brands

Toyota Land Cruiser 2005, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2005

Reviews:

Brands by name

Popular brands