Toyota Land Cruiser 2005 Owner'S Manual Download Page 274

Page: 274 / 351

261

4. After the tire is lowered completely

to the ground, remove the holding

bracket as shown in the illustration.

When storing the spare tire, put it in

place with the outer side of the wheel

facing up and hook the holding brack-

et as shown in the illustration. Then

secure the tire, taking care that the

tire goes straight up without catching

on any other part, to prevent it from

moving during a collision or sudden

braking.
Check the tire from the side to see

that the tire is stored horizontally.

—Blocking the wheel

2. Block the wheel diagonally op-

posite the flat tire to keep the

vehicle from rolling when it is

jacked up.

When blocking the wheel, place a

wheel block in front of one of the front

wheels or behind one of the rear

wheels.

Summary of Contents for Land Cruiser 2005
































































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2005

Reviews:

Related manuals for Land Cruiser 2005

Brands by name

Popular brands

Toyota Land Cruiser 2005, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2005

Reviews:

Related manuals for Land Cruiser 2005

Brands by name

Popular brands