Toyota Land Cruiser 2005 Owner'S Manual Download Page 108

Page: 108 / 351

13C009b

Type A

13C008b

Type B

Type A—

3. Latch the hooks of lower straps onto

the anchorages and tighten the lower
straps.

Type B—

3. Latch the buckles onto the anchor-

ages

If your child restraint system has a top

strap, it should be anchored. (For the

installation  of  the  top  strap,  see  “—Using
a  top  strap”  on  page  92.)
For  installation  details,  refer  to  the  instruc-

tion manual equipped with each product.

CAUTION

When using the lower anchorages
for the child restraint system, be

sure that there are no irregular ob-

jects around the anchorages or that
the seat belt is not caught.

Push and pull the child restraint

system in different directions to be
sure it is secure. Follow all the

installation instructions provided by

its manufacturer.

Do not install a child restraint sys-

tem on the rear seat if it interferes
with the lock mechanism of the

front seats. Otherwise, the child or

front seat occupant(s) may be killed
or seriously injured in case of sud-

den braking or a collision.

Summary of Contents for Land Cruiser 2005
































































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2005

Reviews:

Brands by name

Popular brands

Toyota Land Cruiser 2005, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2005

Reviews:

Brands by name

Popular brands