Toyota Land Cruiser 2005 Owner'S Manual Download Page 57

Page: 57 / 351

13c557a

3. Swing the whole seat up.

13c558

4. Hook the strap.

When returning the third seat to its origi-
nal position, put the holding strap into the

hole.

13c559

5. Remove the seat hook covers from

the back of the seat cushion, and
install them over the seat hooks.

CAUTION

Be sure to apply the covers on the
seat hooks, or you may get burned

when they become hot.

When returning the third seat to its origi-

nal position, remove the seat hook covers

from the floor and install them in the back
of the seat cushion.

Summary of Contents for Land Cruiser 2005
































































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2005

Reviews:

Related manuals for Land Cruiser 2005

Brands by name

Popular brands

Toyota Land Cruiser 2005, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2005

Reviews:

Related manuals for Land Cruiser 2005

Brands by name

Popular brands