Toyota Land Cruiser 2005 Owner'S Manual Download Page 259

Page: 259 / 351

246

CAUTION

If the total trailer weight exceeds
453 kg (1000 lb.), trailer brakes are

required.

Never tap into your vehicle’s hy-
draulic system as it would lower its

braking effectiveness.

Never tow a trailer without using a

safety chain securely attached to

both the trailer and the vehicle. If
damage occurs to the coupling unit

or hitch ball, there is danger of the

trailer wandering over into another
lane.

TIRES

Ensure that your vehicle’s tires are

properly  inflated.  Adjust  the  tire  infla-
tion  pressure  indicated  below:
tire  inflation  pressure,  kPa  (psi)

Front

220 (32)

Rear

240 (35)

See Section 7

−

2 and Section 8 for in-

structions.

The trailer tires should be inflated to
the pressure recommended by the trail-

er manufacturer in respect to the total

trailer weight.

TRAILER LIGHTS

Your vehicle is equipped with a wire
harness stored in the rear end under

body. Your vehicle is fitted with a sock-
et for trailer lights under the rear

bumper. Use either of them to connect

and operate the trailer lights. However,
the trailer lights must comply with fed-

eral, state/provincial and local regula-

tions. See your local recreational ve-
hicle dealer or rental agency for the

correct type of wiring and relays for

your trailer. Check for correct operation
of the turn signals and stop lights each

time you hitch up. Direct splicing may

damage your vehicle’s electrical system
and cause a malfunction of your lights.

Summary of Contents for Land Cruiser 2005
































































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2005

Reviews:

Related manuals for Land Cruiser 2005

Brands by name

Popular brands

Toyota Land Cruiser 2005, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2005

Reviews:

Related manuals for Land Cruiser 2005

Brands by name

Popular brands