Toyota Land Cruiser 2005 Owner'S Manual Download Page 52

Page: 52 / 351

CAUTION

After returning the seat, make sure
the seat is securely locked by push-

ing forward and rearward on the top

of the seatback and by trying to pull
up the edge of the bottom cushion.

—Tumbling second seat

I13378b

BEFORE TUMBLING SECOND SEAT

1. Stow the second seat belt buckles

as shown in the illustration.

This prevents the seat belt buckles from
falling out when you tumble the second

seat.

NOTICE

The seat belt buckles must be stowed
before you tumble the second seat.

I13340a

2. Make sure the shoulder belt passes

through the hanger when folding the
second seat.

This prevents the shoulder belt from being
damaged.

CAUTION

The seat belt must be removed from
the hanger when the seat belt is in

use.

Summary of Contents for Land Cruiser 2005
































































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2005

Reviews:

Related manuals for Land Cruiser 2005

Brands by name

Popular brands

Toyota Land Cruiser 2005, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2005

Reviews:

Related manuals for Land Cruiser 2005

Brands by name

Popular brands