Toyota Land Cruiser 2005 Owner'S Manual Download Page 111

Page: 111 / 351

ADJUSTMENT OF STEERING WHEEL

TILT
To adjust the tilt of the steering wheel,

push the control switch upward or
downward to set it to the desired posi-

tion.

CAUTION

Do not adjust the steering wheel
while the vehicle is moving. Doing so

may cause the driver to mishandle

the vehicle and an accident may oc-
cur resulting in death or serious inju-

ries.

ADJUSTMENT OF TELESCOPIC STEER-

ING COLUMN
To adjust the steering column length,

push the control switch forward or
backward to set the steering wheel to

the desired position.

When the ignition key is removed, the
steering column moves forward away from

the driver and also tilts up for easy exit

and entry.
When the key is inserted into the ignition

switch,  the  steering  column  returns  to  the
previously  set  position.
This  feature  can  be  set  inoperative.  Ask

your Toyota dealer.

CAUTION

Do not adjust the steering column
while the vehicle is moving. Doing so

may cause the driver to mishandle

the vehicle and an accident may oc-
cur resulting in death or serious inju-

ries.

Power tilt and telescopic steer-

ing wheel

Summary of Contents for Land Cruiser 2005
































































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2005

Reviews:

Related manuals for Land Cruiser 2005

Brands by name

Popular brands

Toyota Land Cruiser 2005, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2005

Reviews:

Related manuals for Land Cruiser 2005

Brands by name

Popular brands