Toyota Land Cruiser 2005 Owner'S Manual Download Page 276

Page: 276 / 351

263

—Positioning the jack

5. Position the jack at the correct

jack point as shown.

JACK POINTS:

Front—Under the frame side rail

Left rear—Under the rear axle

housing

Right rear—Under the bracket on

the rear axle housing

Make sure the jack is positioned on

a level and solid place.

Put a jack handle, jack handle exten-

sions, and jack handle end together

as shown in the illustration.
1

Jack handle end

Jack handle extensions

Jack handle

CAUTION

Make sure they are each securely

fixed with screws.

Summary of Contents for Land Cruiser 2005
































































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2005

Reviews:

Brands by name

Popular brands

Toyota Land Cruiser 2005, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2005

Reviews:

Brands by name

Popular brands