Toyota Land Cruiser 2005 Owner'S Manual Download Page 246

Page: 246 / 351

233

CAUTION

Even if the total load of occu-

pant’s weight and the cargo load

is less than the total load capac-

ity, do not apply the load uneven-

ly. That may cause not only dam-

age to the tire but also deteriora-

tion to the steering ability due to

unbalance of the vehicle, causing

an accident.

Cargo

capacity

Weight of removed

third seat

SEATING CONFIGURATION VARI-

ATION

In case of removing the third seat, it

is possible to load as much cargo as

the weight of the removed seat.
(Cargo capacity) = (Total load capac-

ity) – (Total weight of occupants) +

(weight of the removed third seat)
Third seat weight, kg (lb.):

Right

20 (44)

Left

20 (44)

Types of tires

Determine what kind of tires your

vehicle is originally equipped with.

1. Summer tires

Summer tires are high

−

speed capabil-

ity tires best suited to highway driving

under dry conditions.
Since summer tires do not have the

same traction performance as snow

tires, summer tires are inadequate for

driving on snow

−

covered or icy roads.

For driving on snow

−

covered or icy

roads, we recommend using snow

tires. If installing snow tires, be sure

to replace all four tires.

2. All season tires

All season tires are designed to pro-

vide better traction in snow and to be

adequate for driving in most winter

conditions, as well as for use all year

round.

Summary of Contents for Land Cruiser 2005
































































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2005

Reviews:

Related manuals for Land Cruiser 2005

Brands by name

Popular brands

Toyota Land Cruiser 2005, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2005

Reviews:

Related manuals for Land Cruiser 2005

Brands by name

Popular brands