Toyota Land Cruiser 2005 Owner'S Manual Download Page 88

Page: 88 / 351

If any of the following conditions occurs,

this indicates a malfunction of the airbags

or seat belt pretensioners. Contact your
Toyota dealer as soon as possible.

The light does not come on when the

ignition key is turned to the “ON” posi-
tion or remains on for more than 6

seconds or flashes.

The light comes on or starts flashing

while driving.

In the following cases, contact your Toyota

dealer as soon as possible:

Any of the SRS side airbags and cur-
tain shield airbags have been inflated.

The portion of the doors (shaded in the
illustration) was involved in an accident

that was not severe enough to cause

the SRS side airbags and curtain
shield airbags to inflate.

The surface of the seats with the side

airbag (shaded in the illustration) is
scratched, cracked, or otherwise dam-

aged.

The portion of the front, center and

rear garnish, and roof interior contain-

ing the curtain shield airbags inside
(shaded in the illustration) is scratched,

cracked, or otherwise damaged.

NOTICE

Do not disconnect the battery cables
before contacting your Toyota dealer.

Summary of Contents for Land Cruiser 2005
































































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2005

Reviews:

Brands by name

Popular brands

Toyota Land Cruiser 2005, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2005

Reviews:

Brands by name

Popular brands