Toyota Land Cruiser 2005 Owner'S Manual Download Page 26

Page: 26 / 351

Inserting the registered key in the ignition

switch automatically cancels the system,

which  enables  the  engine  to  start.  The
indicator  light  will  go  off.
For  your  Toyota  dealer  to  make  a  new  key

with a built

−

in transponder chip, your

dealer will need your key number and

master key. However, there is a limit to

the number of additional keys your Toyota
dealer can make for you.

If you make your own duplicate key,
you will not be able to cancel the sys-

tem or start the engine.

FCC ID: MOZRI

−

20BTY

MADE IN JAPAN

This device complies with Part 15 of the

FCC Rules. Operation is subject to the

following two conditions:
(1) This device may not cause harmful

interference, and (2) this device must

accept any interference received, includ-
ing interference that may cause unde-

sired operation.

CAUTION

Changes or modifications not ex-
pressly approved by the party respon-

sible for compliance could void the

user’s authority to operate the equip-
ment.

Wireless remote control*—

12c520

1. “LOCK”  switch
2. Indicator  light
3. “PANIC”  switch
4. “UNLOCK”  switch

The wireless remote control system is

designed to lock or unlock all the side

doors and back door from a distance
within approximately 1 m (3 ft.) of the

vehicle.

NOTE: *This feature can be deactivated

as vehicle theft deterrent measure in case
of the loss of the wireless remote control

key. Ask your Toyota dealer for details.

When you operate any switch, push it

slowly and securely. At this time, the indi-

cator light flashes once.

Summary of Contents for Land Cruiser 2005
































































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2005

Reviews:

Related manuals for Land Cruiser 2005

Brands by name

Popular brands

Toyota Land Cruiser 2005, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2005

Reviews:

Related manuals for Land Cruiser 2005

Brands by name

Popular brands