Toyota Land Cruiser 2005 Owner'S Manual Download Page 92

Page: 92 / 351

CAUTION

Do not install a child restraint system
on the third seat if it interferes with

the lock mechanism of the second

seats. Otherwise, the child or second
seat occupant(s) may be killed or se-

riously injured in case of sudden

braking or a collision.

1. Run the center lap belt through or

around the infant seat following the
instructions provided by its manufactur-

er and insert the tab into the buckle

taking care not to twist the lap belt.

CAUTION

After inserting the tab, make sure
the tab and buckle are locked and

that the lap portion of the belt is

not twisted.

Do not insert coins, clips, etc. in

the buckle as this may prevent your

child from properly latching the tab
and buckle.

If the seat belt does not function
normally, it cannot protect your

child from death or serious injury.

Contact

your

Toyota

dealer

immediately. Do not install the child

restraint system on the seat until

the seat belt is fixed.

Summary of Contents for Land Cruiser 2005
































































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2005

Reviews:

Brands by name

Popular brands

Toyota Land Cruiser 2005, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2005

Reviews:

Brands by name

Popular brands