Toyota Land Cruiser 2005 Owner'S Manual Download Page 69

Page: 69 / 351

The seat belt pretensioner system con-

sists mainly of the following components,
and their locations are shown in the il-

lustration.

1. Front  airbag  sensors
2. SRS  warning  light
3. Seat  belt  pretensioner  assemblies
4. Airbag  sensor  assembly

The seat belt pretensioners are controlled

by the airbag sensor assembly. The airbag

sensor assembly consists of a safing sen-
sor and airbag sensor.

When the seat belt pretensioners are acti-

vated, an operating noise may be heard

and a small amount of non

−

toxic gas may

be released. This does not indicate that

a fire is occurring. This gas is normally

harmless.
Once the seat belt pretensioners have

been activated, the seat belt retractors

remain locked.

CAUTION

Do not modify, remove, strike or
open the seat belt pretensioner as-

semblies, airbag sensor or sur-

rounding area or wiring. Failure to
follow these instructions may pre-

vent the seat belt pretensioners

from activating correctly, cause sud-
den operation of the system or dis-

able the system, resulting in death

or serious injury.

Do not use tires or wheels other
than the manufacturer’s recom-

mended size. Such a use may cause

the curtain shield airbags and seat
belt pretensioners to inflate acci-

dentally, resulting in death or seri-

ous injury. For details, see “Check-
ing and replacing tires” on page

304.

Do not place luggage heavier than
specified on the roof luggage carri-

er. Such luggage may cause the

curtain shield airbags and seat belt
pretensioners to inflate accidentally,

resulting in death or serious injury.
For details, see “Roof luggage car-

rier” on page 202.

Do not modify or change the sus-
pension system. Such changes may

cause the curtain shield airbags to

inflate accidentally, resulting in
death or serious injury.

Failure to follow these instructions

can result in death or serious inju-

ries. Consult your Toyota dealer

about any repair and modification.

Summary of Contents for Land Cruiser 2005
































































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2005

Reviews:

Brands by name

Popular brands

Toyota Land Cruiser 2005, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2005

Reviews:

Brands by name

Popular brands