Toyota Land Cruiser 2005 Owner'S Manual Download Page 312

Page: 312 / 351

299

Coolant type selection

Use of improper coolants may damage

your engine cooling system.
Only use “Toyota Super Long Life Coolant”

or similar high quality ethylene glycol
based non

−

silicate, non

−

amine, non

−

nitrite,

and non

−

borate coolant with long

−

life

hybrid organic acid technology. (Coolant
with

long

−

life

hybrid

organic

acid

technology is a combination of low

phosphates and organic acids.)
“Toyota Super Long Life Coolant” is a mix-

ture of 50% coolant and 50% deionized

water. This coolant provides protection
down to about –35

C (–31

F).

NOTICE

Do not use plain water alone.

Toyota recommends “Toyota Super Long

Life Coolant”, which has been tested to
ensure that it will not cause corrosion nor

result in malfunction of your engine cool-

ant system with proper usage. “Toyota Su-
per Long Life Coolant” is formulated with

long

−

life hybrid organic acid technology

and has been specifically designed to
avoid engine cooling system malfunction

on Toyota vehicles.
Please contact your Toyota dealer for fur-

ther details.

If any of the above parts are extremely

dirty or you are not sure of their condi-

tion, take your vehicle to a Toyota dealer.

CAUTION

To prevent burning yourself, be care-
ful not to touch the radiator or con-

denser when the engine is hot.

NOTICE

To prevent damage to the radiator
and condenser, do not perform the

work by yourself.

Checking the radiator and

condenser

Summary of Contents for Land Cruiser 2005
































































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2005

Reviews:

Related manuals for Land Cruiser 2005

Brands by name

Popular brands

Toyota Land Cruiser 2005, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2005

Reviews:

Related manuals for Land Cruiser 2005

Brands by name

Popular brands