Toyota Land Cruiser 2005 Owner'S Manual Download Page 292

Page: 292 / 351

279

3. Wax the vehicle again when water

does not bead but remains on the sur-

face in large patches.

NOTICE

Always remove the plastic bumpers if

your vehicle is re

−

painted and placed

in a high heat paint waxing booth.

High temperatures could damage the

bumpers.

Cleaning the interior

CAUTION

Vehicles  with  side  airbags  and  cur-
tain  shield  airbags:
Be  careful  not  to  splash  water  or

spill liquid on the floor. This may
prevent the side and curtain shield

airbags from activating correctly, re-

sulting in serious injury.

Do not wash the vehicle floor with

water, or allow water to get onto
the floor when cleaning the vehicle

interior or exterior. Water may get

into audio components or other
electrical components above or un-

der the floor carpet (or mat) and

cause a malfunction; and it may
cause body corrosion.

Vinyl interior
The vinyl upholstery may be easily

cleaned with a mild soap or detergent
and water.

First vacuum over the upholstery to re-
move loose dirt. Then, using a sponge or

soft cloth, apply the soap solution to the

vinyl. After allowing it to soak in for a few
minutes to loosen the dirt, remove the dirt

and wipe off the soap with a clean damp

cloth. If all the dirt do not come off, re-
peat the procedure. Commercial foaming

−

type vinyl cleaners are also available

which work well. Follow the manufacturer’s
instructions.

NOTICE

Do not use solvent, thinner, gasoline
or window cleaner on the interior.

Summary of Contents for Land Cruiser 2005
































































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2005

Reviews:

Related manuals for Land Cruiser 2005

Brands by name

Popular brands

Toyota Land Cruiser 2005, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2005

Reviews:

Related manuals for Land Cruiser 2005

Brands by name

Popular brands