Toyota Land Cruiser 2005 Owner'S Manual Download Page 87

Page: 87 / 351

Do not place luggage heavier than
specified on the roof luggage carri-

er. Such luggage may cause the

curtain shield airbags to inflate ac-
cidentally, resulting in death or seri-

ous injury. For details, see “Roof

luggage carrier” on page 202.

Failure to follow these instructions

can result in death or serious injury.

Consult your Toyota dealer about any
repair and modification.

NOTICE

Do not perform any of the following
changes

without

consulting

your

Toyota dealer. Such changes can in-

terfere with proper operation of the
SRS side airbag and curtain shield

airbag system in some cases.

Installation of electronic devices
such as a mobile two

−

way radio,

cassette tape player or compact

disc player.

Modification of the side structure of

the passenger compartment.

Repairs made on or near the con-

sole or front seat.

The indicator comes on when the igni-

tion key is turned to the “ON” position.
It goes off after about 6 seconds. This

means the SRS side airbags and curtain

shield airbags are operating properly.

This warning light system monitors the

airbag sensor assembly, front airbag sen-
sors, side and curtain shield airbag sensor

assemblies, curtain shield airbag sensor

assemblies, driver’s seat position sensor,
driver’s seat belt buckle switch, seat belt

pretensioner assemblies, inflators, warning

light, roll sensing of curtain shield airbags
off indicator light, interconnecting wiring

and power sources. (For details, see “Ser-

vice reminder indicators and warning buzz-
ers” on page 122.)

Summary of Contents for Land Cruiser 2005
































































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2005

Reviews:

Related manuals for Land Cruiser 2005

Brands by name

Popular brands

Toyota Land Cruiser 2005, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2005

Reviews:

Related manuals for Land Cruiser 2005

Brands by name

Popular brands