Toyota Land Cruiser 2005 Owner'S Manual Download Page 43

Page: 43 / 351

1. To open the fuel filler door, pull the

lever.
When refueling, turn off the engine.

CAUTION

Do not smoke, cause sparks or al-
low open flames when refueling.

The fumes are flammable.

When opening the cap, do not re-
move the cap quickly. In hot weath-

er, fuel under pressure could cause

injury by spraying out of the filler
neck if the cap is suddenly re-

moved.

12C006b

2. To remove the fuel tank cap, turn

the cap slowly counterclockwise,
then pause slightly before removing

it. After removing the cap, hang it

on the cap hanger.

It is not unusual to hear a slight swoosh

when the cap is opened. When installing,
turn the cap clockwise till you hear a

click.
If the cap is not tightened securely, the
malfunction indicator lamp comes on.

Make sure the cap is tightened securely.

CAUTION

Make sure the cap is installed se-
curely to prevent fuel spillage in

the event of an accident.

Use only a genuine Toyota fuel tank
cap for replacement. It is designed

to regulate fuel tank pressure.

Summary of Contents for Land Cruiser 2005
































































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2005

Reviews:

Brands by name

Popular brands

Toyota Land Cruiser 2005, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2005

Reviews:

Brands by name

Popular brands