Toyota Land Cruiser 2005 Owner'S Manual Download Page 275

Page: 275 / 351

262

—Removing wheel ornament

3. Remove the wheel ornament.

Pry off the wheel ornament, using the

beveled end of the wheel ornament

remover as shown.

CAUTION

Do not try to pull off the orna-

ment by hand. Take due care in

handling the ornament to avoid

unexpected personal injury.

—Loosening wheel nuts

4. Loosen all the wheel nuts.

Always loosen the wheel nuts before

raising the vehicle.
Turn the wheel nuts counterclockwise

to loosen. To get maximum leverage,

fit the wrench to the nut so that the

handle is on the right side, as shown

above. Grab the wrench near the end

of the handle and pull up on the han-

dle. Be careful that the wrench does

not slip off the nut.
Do not remove the nuts yet—just un-

screw them about one

−

half turn.

CAUTION

Never use oil or grease on the

bolts or nuts. The nuts may loos-

en and the wheels may fall off,

which could cause a serious ac-

cident.

Summary of Contents for Land Cruiser 2005
































































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2005

Reviews:

Brands by name

Popular brands

Toyota Land Cruiser 2005, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2005

Reviews:

Brands by name

Popular brands