Toyota Land Cruiser 2005 Owner'S Manual Download Page 80

Page: 80 / 351

CAUTION

Make sure the roll sensing of cur-
tain shield airbags off indicator

light is not on.

When the roll sensing of curtain
shield airbags off switch is turned

on (and the roll sensing of curtain

shield airbags off indicator light is
on), the curtain shield airbags will

not inflate in a vehicle rollover and

turning off the curtain shield air-
bags can reduce the occupant

protection which your vehicle safety

systems can provide to you in cer-
tain accidents and increase the like-

lihood of death or serious injuries.

The SRS side airbags may not inflate if

the vehicle is subjected to a collision
from the side at certain angles, or a

collision to the side of the vehicle body

other than the passenger compartment
as shown in the illustration.

The SRS side airbags are designed to
inflate when the passenger compartment

area suffers a severe impact from the

side.
Always wear your seat belts properly.

Collision from the rear

Collision from the front

Vehicle rollover

The SRS side airbags are not generally

designed to inflate if the vehicle is in-
volved in a front or rear collision, if it

rolls over, or if it is involved in a low

−

speed side collision.

Summary of Contents for Land Cruiser 2005
































































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2005

Reviews:

Brands by name

Popular brands

Toyota Land Cruiser 2005, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2005

Reviews:

Brands by name

Popular brands