Toyota Land Cruiser 2005 Owner'S Manual Download Page 42

Page: 42 / 351

If any of the side door or back door is

unlocked without the key or wireless re-

mote control key and the key is not in the
ignition switch, all the side doors and

back door will be automatically locked

again.
After one minute, the alarm will automati-

cally stop and the indicator light will starts

flashing again.

Reactivating the alarm

Once  set,  the  system  automatically  resets
the  alarm  after  the  alarm  stops.
The  alarm  will  activate  again  under  the
same

circumstances

described

“Activating the system”.

Stopping the alarm

The alarm will be stopped by the following

two ways:

Turn the ignition key from the “LOCK”

to “ON” position.

Unlock any of the side doors or back

door with the key or wireless remote

control key.

These ways cancel the system at the

same time.

TESTING THE SYSTEM

1. Open all the windows.
2. Set the system as described above.

The side doors and back door should

be locked with the key or wireless re-
mote control key. Be sure to wait until

the indicator light goes off or starts

flashing.

3. Unlock any side door or back door

from the inside. The system should ac-

tivate the alarm.

4. Stop the alarm as described above.
5. Repeat this operation for the other

doors, back door and hood. When test-

ing the hood, also check that the sys-

tem is activated when the battery ter-
minal

disconnected

and

then

reconnected.

If the system does not work properly,

have it checked by your Toyota dealer.

Fuel tank cap

12C503

This indicates that the fuel filler door

is on the left side of your vehicle.

Summary of Contents for Land Cruiser 2005
































































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2005

Reviews:

Brands by name

Popular brands

Toyota Land Cruiser 2005, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2005

Reviews:

Brands by name

Popular brands