Toyota KUN26L-P series Owner'S Manual Download

Page: 191 / 271

184

CAUTION

Do not attempt to remove the radiator

cap when the engine and radiator are

hot. Serious injury could result from

scalding hot fluid and steam blown

out under pressure.

7. After the engine coolant temperature

has cooled to normal, again check the

coolant level in the reservoir. If neces-

sary, bring it up to half full again. Seri-

ous coolant loss indicates a leak in the

system. You should have it checked as

soon as possible at your Toyota dealer.

1. Reduce your speed gradually, keeping

a straight line. Move cautiously off the

road to a safe place well away from

the traffic. Avoid stopping on the center

divider of a highway. Park on a level

spot with firm ground.

2. Stop the engine and turn on your

emergency flashers.

3. Firmly set the parking brake and put

the transmission in “P” (automatic) or

reverse (manual).

4. Have everyone get out of the vehicle

on the side away from traffic.

5. Read the following instructions thor-

oughly.

CAUTION

When jacking, be sure to observe the

following to reduce the possibility of

personal injury:

Follow jacking instructions.

Do not put any part of your body

under the vehicle supported by the

jack. Otherwise, personal injury may

occur.

Do not start or run the engine while

your vehicle is supported by the

jack.

Stop the vehicle on a level firm

ground, firmly set the parking brake

and put the transmission in “P”

(automatic) or reverse (manual).

Block the wheel diagonally opposite

to the one being changed if neces-

sary.

Make sure to set the jack properly

in the jack point. Raising the ve-

hicle with jack improperly posi-

tioned will damage the vehicle or

may allow the vehicle to fall off the

jack and cause personal injury.

Never get under the vehicle when

the vehicle is supported by the jack

alone.

Use the jack only for lifting your

vehicle during wheel changing.

Do not raise the vehicle with some-

one in the vehicle.

When raising the vehicle, do not

place any objects on top of or un-

derneath the jack.

Raise the vehicle only high enough

to remove and change the tire.

HILUX (Argentina) OM99908E

04/10/06

If you have a flat tire—

Summary of Contents for KUN26L-P series
















































































































































































































































































Search results

Summary of Contents for KUN26L-P series

Reviews:

Related manuals for KUN26L-P series

Brands by name

Popular brands

Toyota KUN26L-P series, Owner'S Manual

Search results

Summary of Contents for KUN26L-P series

Reviews:

Related manuals for KUN26L-P series

Brands by name

Popular brands