Toyota KUN26L-P series Owner'S Manual Download Page 66

Page: 66 / 271

Toyota strongly urges the use of ap-

propriate child restraint systems for

children.

If a child is too large for a child restraint

system, the child should sit in the rear

seat and must be restrained using the

vehicle’s seat belt. See “Seat belts” on

page 37 for details.

CAUTION

For effective protection in automo-

bile accidents and sudden stops, a

child must be properly restrained,

using a seat belt or child restraint

system depending on the age and

size of the child. Holding a child in

your arms is not a substitute for a

child restraint system. In an acci-

dent, the child can be crushed

against the windshield, or between

you and the vehicle’s interior.

SINGLE

−

CAB MODELS—

Toyota strongly urges use of a

proper child restraint system which

conforms to the size of the child.

DOUBLE

−

CAB MODELS—

Toyota strongly urges use of a

proper child restraint system which

conforms to the size of the child,

installed on the rear seat. Accord-

ing to accident statistics, the child

is safer when properly restrained in

the rear seat than in the front seat.

Vehicles with a front passenger air-

bag:
Never install a rear

−

facing child re-

straint system on the front passen-

ger seat. In the event of an acci-

dent, the force of the rapid inflation

of the front passenger airbag can

cause death or serious injury to the

child if the rear

−

facing child re-

straint system is installed on the

front passenger seat.
A forward

−

facing child restraint sys-

tem should be allowed to be

installed on the front passenger

seat only when it is unavoidable.

Always move the seat as far back

as possible, because the front pas-

senger airbag could inflate with

considerable

speed

and

force.

Otherwise, the child may be killed

or seriously injured.

Make sure you have complied with

all installation instructions provided

by the child restraint manufacturer

and that the system is properly se-

cured. If it is not secured properly,

it may cause death or serious injury

to the child in the event of a sud-

den stop or accident.

HILUX (Argentina) OM99908E

04/10/06

Child restraint—

—Child restraint precautions

Summary of Contents for KUN26L-P series
















































































































































































































































































Search results

Summary of Contents for KUN26L-P series

Reviews:

Brands by name

Popular brands

Toyota KUN26L-P series, Owner'S Manual

Search results

Summary of Contents for KUN26L-P series

Reviews:

Brands by name

Popular brands