Toyota KUN26L-P series Owner'S Manual Download Page 171

Page: 171 / 271

164

1. Check the area around the vehicle be-

fore entering it.

2. Adjust seat position, seatback angle,

seat height, head restraint height and

steering wheel angle.

3. Adjust the inside and outside rear view

mirrors.

4. Lock all doors.
5. Fasten seat belts.

1. Apply the parking brake firmly.
2. Turn off unnecessary lights and acces-

sories.

Manual transmission:

Press the clutch

pedal to the floor and shift the trans-

mission into neutral. Hold the clutch

pedal to the floor until the engine is

started.

Automatic transmission:

Put the se-

lector lever in “P”. If you need to re-

start the engine while the vehicle is

moving, put the selector lever in “N”.

A starter safety device will prevent the

starter from operating if the selector

lever is in any drive position.

Automatic transmission only:

De-

press the brake pedal and hold it to

the floor until driving off.

Before starting the engine, be sure to

follow the instructions in “(a) Before

cranking”.

Normal starting procedure

The multiport fuel injection system/sequen-

tial multiport fuel injection system in your

engine automatically controls the proper

air

−

fuel mixture for starting. You can start

a cold or hot engine as follows:

1. With your foot off the accelerator ped-

al, crank the engine by turning the key

to “START”. Release it when the en-

gine starts.

2. After the engine runs stably, you are

ready to drive.

If the weather is below freezing, let the

engine warm up for a few minutes before

driving.

If the engine stalls...

Simply restart it, using the correct proce-

dure given in normal starting.

If the engine will not start...

See “If your vehicle will not start” on page

178.

HILUX (Argentina) OM99908E

04/10/06

Before starting the engine

How to start the engine—

(a) Before cranking

(b) Starting the engine

(gasoline engine)

Summary of Contents for KUN26L-P series
















































































































































































































































































Search results

Summary of Contents for KUN26L-P series

Reviews:

Brands by name

Popular brands

Toyota KUN26L-P series, Owner'S Manual

Search results

Summary of Contents for KUN26L-P series

Reviews:

Brands by name

Popular brands