Toyota KUN26L-P series Owner'S Manual Download

Page: 194 / 271

187

NOTICE

Tighten all joints securely. Otherwise,

the extension may come off and it

may damage the paint or vehicle

body.

40h003

2. Insert the jack handle end with the

extensions into the lowering screw

through the access hole and turn it

counterclockwise by pushing it to the

front lightly.

NOTICE

To protect the paint, place several

sheets of paper over the paintwork.

40h042

3. After the tire is lowered completely to

the ground, remove the holding bracket

as shown in the illustration.

HILUX (Argentina) OM99908E

04/10/06

Summary of Contents for KUN26L-P series
















































































































































































































































































Search results

Summary of Contents for KUN26L-P series

Reviews:

Related manuals for KUN26L-P series

Brands by name

Popular brands

Toyota KUN26L-P series, Owner'S Manual

Search results

Summary of Contents for KUN26L-P series

Reviews:

Related manuals for KUN26L-P series

Brands by name

Popular brands