Toyota KUN26L-P series Owner'S Manual Download Page 179

Page: 179 / 271

172

MAINTENANCE

If you tow a trailer, your vehicle will

require more frequent maintenance due

to the additional load.

Retighten all fixing bolts of the towing

ball and bracket after approximately

1000 km (600 miles) of trailer driving.

PRE

−

TOWING SAFETY CHECK

Be sure not to exceed designated max-

imum load for the ball coupling of the

towing bracket. Please remember that

the ball coupling load will increase the

load on the vehicle. Maximum permissi-

ble rear axle capacity must not be ex-

ceeded.

Make sure the trailer cargo is securely

loaded so that it cannot shift.

If the traffic behind the trailer cannot

be seen properly with the standard rear

view mirrors, additional outside mirrors

will be necessary. Both outside mirrors

must be fitted on folding arms and ad-

justed to give a good rear view at all

times.

TRAILER TOWING TIPS
When towing a trailer, your vehicle will

handle differently than when not tow-

ing. The three main causes of vehicle

−

trailer accidents are driver error, exces-

sive speed and improper trailer loading.

Keep these in mind when towing:

Before starting out, check operation of

the lights and all vehicle

−

trailer connec-

tions. After driving a short distance,

stop and recheck the lights and con-

nections. Before actually towing a trail-

er, practice turning, stopping and back-

ing with a trailer in an area away from

traffic until you learn the feel.

Because stopping distance may be in-

creased, vehicle

−

vehicle distance

should be increased when towing a

trailer. For each 10 km/h (6 mph) of

speed, allow at least one vehicle and

trailer length between you and the ve-

hicle ahead. Avoid sudden braking as

you may skid, resulting in jackknifing

and loss of control. This is especially

true on wet or slippery surfaces.

Avoid jerky starts or sudden accelera-

tion. If your vehicle has a manual

transmission, prevent excessive clutch

slippage by keeping engine rpm low

and not racing the engine. Always start

out in first gear.

Avoid jerky steering and sharp turns.

The trailer could hit your vehicle in a

tight turn. Slow down before making a

turn to avoid the necessity of sudden

braking.

Backing with a trailer is difficult and

requires practice. Grip the bottom of

the steering wheel and move your hand

to the left to move the trailer to the

left. Move your hand to the right to

move the trailer to the right. (This pro-

cedure is generally opposite to that

when backing without a trailer.) Also,

just turn the steering wheel a little at

a time, avoiding sharp or prolonged

turning. Have someone guide you when

backing to reduce the risk of an acci-

dent.

Remember that when making a turn,

the trailer wheels will be closer than

the vehicle wheels to the inside of the

turn. Therefore, compensate for this by

making a larger than normal turning

radius with your vehicle.

HILUX (Argentina) OM99908E

04/10/06

Summary of Contents for KUN26L-P series
















































































































































































































































































Search results

Summary of Contents for KUN26L-P series

Reviews:

Brands by name

Popular brands

Toyota KUN26L-P series, Owner'S Manual

Search results

Summary of Contents for KUN26L-P series

Reviews:

Brands by name

Popular brands