Toyota KUN26L-P series Page 202 Owner'S Manual Download

Page: 202 / 271

195

40h015

(a) Towing with wheel lift type truck—

—From front

—From rear

(b) Using flat bed truck

Four

−

wheel drive models

If towing is necessary, we recommend

you to have it done by your Toyota

dealer or a commercial tow truck ser-

vice. In consultation with them, have

your vehicle towed using either (a) or

(b).
Only when you cannot receive a towing

service

from

Toyota

dealer

commercial tow truck service, tow your

vehicle carefully in accordance with the

instructions given in “—Emergency

towing” on page 197.

Proper equipment will help ensure that

your vehicle is not damaged while being

towed. Commercial operators are generally

aware of the state/provincial and local

laws pertaining to towing.
Your vehicle can be damaged if it is

towed incorrectly. Although most operators

know the correct procedure, it is possible

to make a mistake. To avoid damage to

your vehicle, make sure the following pre-

cautions are observed. If necessary, show

this page to the tow truck driver.

TOWING PRECAUTIONS:

Use a safety chain system for all towing,

and abide by the state/provincial and local

laws. The wheels and axle on the ground

must be in good condition. If they are

damaged, use a towing dolly.

Pre Runner—
(a) Towing with wheel lift type truck
From front—

We recommend using a tow-

ing dolly under the rear wheels. If you do

not use a towing dolly, release the parking

brake and put the transmission in neutral.

From rear—

Place the ignition key in the

“ACC” position.

NOTICE

When lifting wheels, take care to

ensure adequate ground clearance

for towing at the opposite end of

the raised vehicle. Otherwise, the

bumper and/or underbody of the

towed vehicle will be damaged dur-

ing towing.

Do not tow with the key removed or

in the “LOCK” position when tow-

ing from the rear without a towing

dolly. The steering lock mechanism

is not strong enough to hold the

front wheels straight.

(b) Using flat bed truck

HILUX (Argentina) OM99908E

04/10/06

Summary of Contents for KUN26L-P series
















































































































































































































































































Search results

Summary of Contents for KUN26L-P series

Reviews:

Related manuals for KUN26L-P series

Brands by name

Popular brands

Toyota KUN26L-P series, Owner'S Manual

Search results

Summary of Contents for KUN26L-P series

Reviews:

Related manuals for KUN26L-P series

Brands by name

Popular brands