Toyota KUN26L-P series Owner'S Manual Download

Page: 52 / 271

13h053

1. SEAT POSITION ADJUSTING LEVER

Pull the lever up. Then slide the seat

to the desired position with slight body

pressure and release the lever.

2. SEATBACK

ANGLE

ADJUSTING

LEVER

Lean forward and pull the lever up.

Then lean back to the desired angle

and release the lever.

CAUTION

Avoid reclining the seatback any

more than needed. The seat belts pro-

vide maximum protection in a frontal

or rear collision when the driver and

the passenger are sitting up straight

and well back in the seats. If you are

reclined, the lap belt may slide past

your hips and apply restraint forces

directly to the abdomen or your neck

may contact the shoulder belt. In the

event of a frontal collision, the more

the seat is reclined, the greater the

risk of death or personal injury.

13h004a

1. Pull the strap as shown. The latch

under the seat cushion will release,

allowing the seat cushion to be

raised.

2. Raise the seat cushion as shown

and anchor the strap to the bracket

behind the rear seat.

HILUX (Argentina) OM99908E

04/10/06

—Adjusting front seat

(single

−

cab models)

Tumbling rear seat cushion

(double

−

cab models)

Summary of Contents for KUN26L-P series
















































































































































































































































































Search results

Summary of Contents for KUN26L-P series

Reviews:

Related manuals for KUN26L-P series

Brands by name

Popular brands

Toyota KUN26L-P series, Owner'S Manual

Search results

Summary of Contents for KUN26L-P series

Reviews:

Related manuals for KUN26L-P series

Brands by name

Popular brands