Toyota KUN26L-P series Owner'S Manual Download

Page: 160 / 271

153

NOTICE

A large amount of unburned gases

flowing into the catalytic converter

may cause it to overheat and create

a fire hazard. To prevent this and oth-

er damage, observe the following pre-

cautions:

Use only diesel fuel.

Do not drive with an extremely low

fuel level; running out of fuel could

cause the engine to misfire, creat-

ing an excessive load on the cata-

lytic converter.

Do not allow the engine to run at

idle speed for more than 20 min-

utes.

Do not push

−

start or pull

−

start your

vehicle.

Do not turn off the ignition while

the vehicle is moving.

Keep your engine in good running

order. Malfunctions in the engine

electrical system or fuel system

could cause an extremely high cata-

lytic converter temperature.

If the engine becomes difficult to

start or stalls frequently, take your

vehicle in for a check

−

up as soon

as possible. Remember, your Toyota

dealer knows your vehicle and its

catalytic converter system best.

To ensure that the catalytic convert-

er and the entire emission control

system operate properly, your ve-

hicle must receive the periodic in-

spections required by the Toyota

Maintenance Schedule. (See page

209.)

CAUTION

Avoid inhaling the engine exhaust.

It contains carbon monoxide, which

is a colorless and odorless gas. It

can cause unconsciousness or even

death.

Make sure the exhaust system has

no holes or loose connections. The

system should be checked from

time to time. If you hit something,

or notice a change in the sound of

the

exhaust,

have

the

system

checked immediately.

Do not run the engine in a garage

or enclosed area except for the

time needed to drive the vehicle in

or out. The exhaust gases cannot

escape, making this a particularly

dangerous situation.

Do not remain for a long time in a

parked vehicle with the engine run-

ning. If it is unavoidable, however,

do so only in an unconfined area

and adjust the heating or cooling

system to force outside air into the

vehicle.

HILUX (Argentina) OM99908E

04/10/06

Engine exhaust cautions

Summary of Contents for KUN26L-P series
















































































































































































































































































Search results

Summary of Contents for KUN26L-P series

Reviews:

Related manuals for KUN26L-P series

Brands by name

Popular brands

Toyota KUN26L-P series, Owner'S Manual

Search results

Summary of Contents for KUN26L-P series

Reviews:

Related manuals for KUN26L-P series

Brands by name

Popular brands