Toyota KUN26L-P series Owner'S Manual Download

Page: 76 / 271

CAUTION

After inserting the tab, make sure

the tab and buckle are locked and

that the lap and shoulder portions

of the belt are not twisted.

Do not insert coins, clips, etc. in

the buckle as this may prevent you

from properly latching the tab and

buckle.

If the seat belt does not function

normally, it cannot protect your

child from death or serious injury.

Contact

your

Toyota

dealer

immediately. Do not install the child

restraint system on the seat until

the seat belt is fixed.

Push and pull the child restraint

system in different directions to be

sure it is secure. Follow all the

installation instructions provided by

its manufacturer.

13H092

3. To remove the baby (infant) seat, press

the buckle release button and allow the

belt to retract completely. The belt will

move freely again and be ready to

work for an adult or older child passen-

ger.

CAUTION

Always remove the locking clip when

the child restraint system is not

installed.

HILUX (Argentina) OM99908E

04/10/06

Summary of Contents for KUN26L-P series
















































































































































































































































































Search results

Summary of Contents for KUN26L-P series

Reviews:

Related manuals for KUN26L-P series

Brands by name

Popular brands

Toyota KUN26L-P series, Owner'S Manual

Search results

Summary of Contents for KUN26L-P series

Reviews:

Related manuals for KUN26L-P series

Brands by name

Popular brands