Toyota KUN26L-P series Owner'S Manual Download

Page: 172 / 271

165

NOTICE

Do not crank for more than 30 sec-

onds at a time. This may overheat

the starter and wiring systems.

Do not race a cold engine.

If the engine becomes difficult to

start or stalls frequently, have the

engine checked immediately.

30h001

Before starting the engine, be sure to fol-

low the instructions in “(a) Before crank-

ing”.

Normal starting procedure (engine cold)

1. Turn the key to “ON” and verify that

the engine preheating indicator light

has come on. Keep the key in the

“ON” position until the light goes off.

2. With your foot off the accelerator ped-

al, crank the engine by turning the key

to “START”. Release it when the en-

gine starts.

3. After the engine runs stably, you are

ready to drive.

If the weather is below freezing, let the

engine warm up for a few minutes before

driving.

If the engine is warm...

If the engine does not start, try the above

“Normal starting procedure”.

If the engine stalls...

Simply restart it, using the correct proce-

dure given above, depending on the en-

gine temperature.

If the engine will not start...

See “If your vehicle will not start” on page

178.

HILUX (Argentina) OM99908E

04/10/06

(b) Starting the engine

(diesel engine)

Summary of Contents for KUN26L-P series
















































































































































































































































































Search results

Summary of Contents for KUN26L-P series

Reviews:

Related manuals for KUN26L-P series

Brands by name

Popular brands

Toyota KUN26L-P series, Owner'S Manual

Search results

Summary of Contents for KUN26L-P series

Reviews:

Related manuals for KUN26L-P series

Brands by name

Popular brands