Toyota KUN26L-P series Owner'S Manual Download

Page: 246 / 271

239

WHEN TO REPLACE YOUR WHEELS
If you have wheel damage such as

bending, cracks or heavy corrosion, the

wheel should be replaced.

If you fail to replace a damaged wheel,

the tire may slip off the wheel or cause

loss of handling control.

WHEEL SELECTION
When replacing wheels, care should be

taken to ensure that the wheels are re-

placed by ones with the same load ca-

pacity, diameter, rim width, and offset.

Correct replacement wheels are available

at your Toyota dealer.
A wheel of a different size or type may

adversely affect handling, wheel and bear-

ing life, brake cooling, speedometer/odom-

eter calibration, stopping ability, headlight

aim, bumper height, vehicle ground clear-

ance, and tire or snow chain clearance to

the body and chassis.

Replacement with used wheels is not rec-

ommended as they may have been sub-

jected to rough treatment or high mileage

and could fail without warning. Also, bent

wheels which have been straightened may

have structural damage and therefore

should not be used. Never use an inner

tube in a leaking wheel which is designed

for a tubeless tire.

CAUTION

Observe the following instructions.

Otherwise, an accident may occur re-

sulting in death or serious injuries.

Do not use wheels other than the

manufacturer’s recommended size,

as this may cause dangerous han-

dling characteristics resulting in

loss of control.

Four

−

wheel drive models:

Do not use wheels of different

brands, sizes and types, as this

may

cause

dangerous

handling

characteristics resulting in loss of

control.

When

installing

aluminum

wheels,

check that the wheel nuts are tight

after driving your vehicle the first 1600

km (1000 miles).

If you have rotated, repaired, or

changed your tires, check that the

wheel nuts are still tight after driving

1600 km (1000 miles).

When using tire chains, be careful not

to damage the aluminum wheels.

Use only the Toyota wheel nuts and

wrench designed for your aluminum

wheels.

When balancing your wheels, use only

Toyota balance weights or equivalent

and a plastic or rubber hammer.

As with any wheel, periodically check

your aluminum wheels for damage. If

damaged, replace immediately.

HILUX (Argentina) OM99908E

04/

0/06

Replacing wheels

Aluminum wheel precautions

Summary of Contents for KUN26L-P series
















































































































































































































































































Search results

Summary of Contents for KUN26L-P series

Reviews:

Related manuals for KUN26L-P series

Brands by name

Popular brands

Toyota KUN26L-P series, Owner'S Manual

Search results

Summary of Contents for KUN26L-P series

Reviews:

Related manuals for KUN26L-P series

Brands by name

Popular brands