Toyota KUN26L-P series Page 242 Owner'S Manual Download

Page: 242 / 271

235

Keep your tire inflation pressures at the

proper level.

The recommended cold tire inflation pres-

sures and tire sizes are given on page

261.
You should check the tire inflation pres-

sure every two weeks, or at least once a

month. And do not forget the spare!
Incorrect tire inflation pressure may waste

fuel, reduce the comfort of driving, reduce

tire life and make your vehicle less safe

to drive.
If a tire frequently needs refilling, have it

checked by your Toyota dealer.

The following instructions for checking

tire inflation pressure should be ob-

served:

The pressure should be checked only

when the tires are cold.

If your ve-

hicle has been parked for at least 3

hours and has not been driven for

more than 1.5 km or 1 mile since, you

will get an accurate cold tire inflation

pressure reading.

Always use a tire pressure gauge.

The appearance of a tire can be mis-

leading. Besides, tire inflation pres-

sures that are even just a few pounds

off can degrade ride and handling.

Do not bleed or reduce tire inflation

pressure after driving.

It is normal for

the tire inflation pressure to be higher

after driving.

Be sure to reinstall the tire valve

caps.

Without the valve caps, dirt or

moisture could get into the valve core

and cause air leakage. If the caps

have been lost, have new ones put on

as soon as possible.

CAUTION

Keep your tires properly inflated.

Otherwise, the following conditions

may occur and cause an accident re-

sulting in death or serious injuries.
Low tire pressure (underinflation)—

Excessive wear

Uneven wear

Poor handling

Possibility of blowouts from over-

heated tire

Poor sealing of the tire bead

Wheel deformation and/or tire sepa-

ration

High tire pressure (overinflation)—

Poor handling

Excessive wear

Uneven wear

A greater possibility of tire damage

from road hazards

HILUX (Argentina) OM99908E

04/

0/06

Checking tire inflation

pressure

Summary of Contents for KUN26L-P series
















































































































































































































































































Search results

Summary of Contents for KUN26L-P series

Reviews:

Related manuals for KUN26L-P series

Brands by name

Popular brands

Toyota KUN26L-P series, Owner'S Manual

Search results

Summary of Contents for KUN26L-P series

Reviews:

Related manuals for KUN26L-P series

Brands by name

Popular brands