Toyota KUN26L-P series Page 156 Owner'S Manual Download

Page: 156 / 271

149

When driving off

−

road or in rugged

terrain, do not drive at excessive

speeds, jump, make sharp turns,

strike objects, etc. This may cause

loss of control or vehicle rollover

causing death or serious injury. You

are also risking expensive damage

to your vehicle’s suspension and

chassis.

Do not drive horizontally across

steep slopes. Driving straight up or

straight down is preferred. Your ve-

hicle (or any similar off

−

road ve-

hicle) can tip over sideways much

more easily than forward or back-

ward.

Drive gently and avoid high speeds.

Your vehicle does not need an elaborate

break

−

in. But following a few simple tips

for the first 1000 km (600 miles) can add

to the future economy and long life of

your vehicle:

Avoid full throttle acceleration when

starting and driving.

Avoid racing the engine.

Try to avoid hard stops during the first

300 km (200 miles).

Do not drive slowly with the manual

transmission in a high gear.

Do not drive for a long time at any

single speed, either fast or slow.

Do not tow a trailer during the first 800

km (500 miles).

Selecting the proper fuel is essential

for satisfactory engine performance.

Engine damage caused by use of improp-

er fuels is not covered under Toyota’s new

vehicle warranty.

FUEL TYPE
Gasoline engine—
Use only unleaded gasoline.

To help prevent gas station mix

−

ups, your

vehicle has a smaller fuel tank opening.

The special nozzle on pumps with un-

leaded fuel will fit it, but the larger stan-

dard nozzle on pumps with leaded gas will

not.

HILUX (Argentina) OM99908E

04/10/06

Break

−

in period

Fuel

Summary of Contents for KUN26L-P series
















































































































































































































































































Search results

Summary of Contents for KUN26L-P series

Reviews:

Related manuals for KUN26L-P series

Brands by name

Popular brands

Toyota KUN26L-P series, Owner'S Manual

Search results

Summary of Contents for KUN26L-P series

Reviews:

Related manuals for KUN26L-P series

Brands by name

Popular brands