Toyota KUN26L-P series Page 187 Owner'S Manual Download

Page: 187 / 271

180

The gas normally produced by a

battery will explode if a flame or

spark is brought near. Use only

standardized jumper cables and do

not smoke or light a match while

jump starting.

NOTICE

The battery used for boosting must

2 V. Do not jump start unless you

are sure that the booster battery is

correct.

JUMP STARTING PROCEDURE

1. If the booster battery is installed in

another vehicle, make sure the vehicles

are not touching. Turn off all unneces-

sary lights and accessories.
When boosting, use the battery of

matching or higher quality. Any other

battery may be difficult to jump start

with.
If jump starting is difficult, charge the

battery for several minutes.

2. If required, remove all the vent plugs

from the booster and discharged batter-

ies. Lay a cloth over the open vents

on the batteries. (This helps reduce the

explosion hazard, personal injuries and

burns.)

3. If the engine in the vehicle with the

booster battery is not running, start it

and let it run for a few minutes. During

jump starting, run the engine at about

2000 rpm with the accelerator pedal

lightly depressed.

Discharged

battery

Booster

battery

Jumper

cable

Positive

terminal

(“+” mark)

Positive

terminal

(“+” mark)

4. Make the cable connections in the or-

der a, b, c, d.
a. Connect the clamp of the positive

(red) jumper cable to the positive (+)

terminal on the discharged battery.
b. Connect the clamp at the other end

of the positive (red) jumper cable to

the positive (+) terminal on the booster

battery.

HILUX (Argentina) OM99908E

04/10/06

Summary of Contents for KUN26L-P series
















































































































































































































































































Search results

Summary of Contents for KUN26L-P series

Reviews:

Related manuals for KUN26L-P series

Brands by name

Popular brands

Toyota KUN26L-P series, Owner'S Manual

Search results

Summary of Contents for KUN26L-P series

Reviews:

Related manuals for KUN26L-P series

Brands by name

Popular brands