Toyota KUN26L-P series Page 158 Owner'S Manual Download

Page: 158 / 271

151

If you plan to drive your Toyota in

another country...
First,

comply with the vehicle registration

laws.

Second,

confirm the availability of the cor-

rect fuel.

20h009

The three

−

way catalytic converters are

emission control devices installed in

the exhaust system.

The purpose is to reduce pollutants in the

exhaust gas.

CAUTION

Keep people and combustible mate-

rials away from the exhaust pipe

while the engine is running. The

exhaust gas is very hot.

Do not idle or park your vehicle

over anything that might burn easi-

ly such as grass, leaves, paper or

rags.

NOTICE

A large amount of unburned gases

flowing into the three

−

way catalytic

converter may cause it to overheat

and create a fire hazard. To prevent

this and other damage, observe the

following precautions:

Use only unleaded gasoline.

Do not drive with an extremely low

fuel level; running out of fuel could

cause the engine to misfire, creat-

ing an excessive load on the three

−

way catalytic converter.

Do not allow the engine to run at

idle speed for more than 20 min-

utes.

Avoid racing the engine.

Do not push

−

start or pull

−

start your

vehicle.

Do not turn off the ignition while

the vehicle is moving.

HILUX (Argentina) OM99908E

04/10/06

Operation in foreign

countries

Three

−

way catalytic

converters (gasoline engine)

Summary of Contents for KUN26L-P series
















































































































































































































































































Search results

Summary of Contents for KUN26L-P series

Reviews:

Related manuals for KUN26L-P series

Brands by name

Popular brands

Toyota KUN26L-P series, Owner'S Manual

Search results

Summary of Contents for KUN26L-P series

Reviews:

Related manuals for KUN26L-P series

Brands by name

Popular brands