Toyota KUN26L-P series Owner'S Manual Download Page 54

Page: 54 / 271

Toyota strongly urges that the driver and

passengers in the vehicle be properly re-

strained at all times with the seat belts

provided. Failure to do so could increase

the chance of injury and/or the severity of

injury in accidents.
The seat belts provided for your vehicle

are designed for people of adult size,

large enough to properly wear them.

Child.

Use a child restraint system ap-

propriate for the child until the child be-

comes large enough to properly wear the

vehicle’s seat belts. See “Child restraint”

on page 49 for details.
SINGLE

−

CAB MODELS—If a child is too

large for a child restraint system, the child

should sit in the seat and must be re-

strained using the vehicle’s seat belt.
DOUBLE

−

CAB MODELS—If a child is too

large for a child restraint system, the child

should sit in the rear seat and must be

restrained using the vehicle’s seat belt.

According to accident statistics, the child

is safer when properly restrained in the

rear seat than in the front seat.

If a child must sit in the front seat, the

seat belts should be worn properly. If an

accident occurs and the seat belts are not

worn properly, the force of the rapid

inflation of the airbag may cause death or

serious injury to the child.
Do not allow any children to stand up or

kneel on either rear or front seats. An

unrestrained child could suffer serious in-

jury or death during emergency braking or

a collision. Also, do not let the child sit

on your lap. Holding a child in your arms

does not provide sufficient restraint.

Pregnant woman.

Toyota recommends the

use of a seat belt. Ask your doctor for

specific recommendations. The lap belt

should be worn securely and as low as

possible over the hips and not on the

waist.

Injured person.

Toyota recommends the

use of a seat belt. Depending on the inju-

ry, first check with your doctor for specific

recommendations.
If seat belt regulations exist in the country

where you reside, please contact your

Toyota dealer for seat belt replacement or

installation.

CAUTION

Persons should ride in their seats

properly wearing their seat belts

whenever the vehicle is moving.

Otherwise, they are much more likely

to suffer serious bodily injury or

death in the event of sudden braking

or a collision.
When using the seat belts, observe

the following:

Use the belt for only one person at

a time. Do not use a single belt for

two or more people—even children.

Avoid reclining the seatback any

more than needed. The seat belts

provide maximum protection in a

frontal or rear collision when the

driver and the front passenger are

sitting up straight and well back in

the seats. If you are reclined, the

lap belt may slide past your hips

and apply restraint forces directly

to the abdomen or your neck may

contact the shoulder belt. In the

event of a frontal collision, the

more the seat is reclined, the great-

er the risk of death or personal in-

jury.

HILUX (Argentina) OM99908E

04/10/06

Seat belts—

—Seat belt precautions

Summary of Contents for KUN26L-P series
















































































































































































































































































Search results

Summary of Contents for KUN26L-P series

Reviews:

Brands by name

Popular brands

Toyota KUN26L-P series, Owner'S Manual

Search results

Summary of Contents for KUN26L-P series

Reviews:

Brands by name

Popular brands